Dealer/Installer Log In

Wish to become a distributor or an installer?
Join Us

Choosing A Location

Plexidor Glass Installation

Sliding Glass Patio Doors ● French Doors ● Stationary Windows ● Other Household Glass Wall Surfaces

The Plexidor Glass Conversion Pet Door was developed to accommodate homeowners who want to mount a Plexidor Pet Door into glass. We have specially designed our new glass mount to simplify the installation process.

The Plexidor Pet Door will fit a variety of locations including:

● Sliding Glass Patio Doors

● French Doors

● Stationary Windows

● Other Household Glass Wall Surfaces
Our installation method replaces the glass unit in your patio door or window. The existing glass panel in your door cannot be used since it is already tempered and cannot be cut.

Replacing the glass with tempered safety glass assures the door is safe and will look great in your home, year after year! The quality of the replacement glass will be similar to the existing glass; you will not have to downgrade your glass.

Determining where the Plexidor Pet Door will be installed.

Sliding glass patio door or a window that opens and closes

Important: Correct location of the pet door is required to ensure operation of the sliding door. The following examples show 4 types of mounting locations. Simply match the drawing to your sliding door. Note: The slider can also go from L to R with the same configurations shown below.

LOCATION A:

Pet door mounted on the slider panel which is located on the inside of the stationary panel

OUTSIDE OF HOME

INSIDE OF HOME

LOCATION B:

Pet door mounted on the slider panel which is located on the outside of the stationary panel

OUTSIDE OF HOME

INSIDE OF HOME

LOCATION C:

Pet door mounted on the stationary panel which is located on outside of the slider panel

OUTSIDE OF HOME

INSIDE OF HOME

LOCATION D:

Pet door mounted on the stationary panel which is located on inside of the slider panel

OUTSIDE OF HOME

INSIDE OF HOME

  •  Locations A and D are the ideal and recommended locations for mounting your pet door..
  •  Locations B and C will work provided there is a 1⁄2 inch gap between the outside panel of glass and the frame of the other panel to allow for the thickness of the lock and interior frame of the Plexidor. (see drawing below)

IMPORTANT:
If you have determined that the configuration is either B or C, make sure you measure for the 1⁄2 inch gap between the outside panel of glass and the sliding panel.

NOTE: About the Small Plexidor Door Unit (Cats up to 24 lbs or Dogs up to 9 lbs)
The Small Plexidor pet Door (PD GLASS SMALL), is only available in locations A and C. Locations B and D are not available locations for this pet door due to clearances.

Contact Us To find your local  Plexidor Dealer / Installer

Choose your color – available colors:

Determine the Plexidor Pet Door size required to fit your pet.

Contact Us via email To find your local  Plexidor Dealer / Installer

Or Call Us Today 604 746 2245